manualshive.com logo in svg

Eneo ICB-72A0003M0A, User Manual

Share
Download
Eneo ICB-72A0003M0A User Manual Download Page 55

55

Full Menu Setup

> NOTIFICATION SERVER: Mark the checkbox to use the notification server as set in
   SETUP>EVENT> ACTIONS> NOTIFICATION SERVER when the selected event occurs.
• MESSAGE : Input the message to be sent to the notification server.
> FTP : Mark the checkbox to use FTP as set in SETUP>EVENT>ACTIONS>FTP when
   the selected event  occurs.
> VIDEO BOOST : Select the video stream to be boosted up. 

> RECORD : Mark the checkbox to record the image into the built-in storage, if available,
   as set in SETUP>EVENT>ACTIONS>RECORD when the selected event occurs. 

[ NOTE ]

  

Video boost is disabled if RECORD is enabled.

●

 ONVIF Mapping

Onvif mapping is provided to map the various events generated by this camera, but not
defined by Onvif, to assign them to Onvif events for the Onvif compatible VMSes or NVRs.
Two mappings for Motion and Alarm In are provided to be mapped and can be used by
editing them.
For example, any of the selected items in tns1:VideoSource/MotionAlarm will notify the 
Onvif compatible VMSes or NVRs as Motion Alarm. In the same way, any of the selected
items in tns1: Device/Trigger/Digital Input will notify the Onvif compatible VMSes or NVRs
as Alarm IN.

Summary of Contents for ICB-72A0003M0A






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands