manualshive.com logo in svg

Eneo ICB-72A0003M0A, User Manual

Share
Download
Eneo ICB-72A0003M0A User Manual Download Page 44

44

Full Menu Setup

Used to trigger the event when the camera gets rebooted.
> Mark ENABLE checkbox to activate the system event.
> DWELL TIME : Sets the time for the alarm once the system event is detected.

> Mark ENABLE checkbox to enable the manual trigger icons on the live view menu.
> DWELL TIME : Sets the time for the event once triggered by the manual trigger on
   the live view  menu.

● 

System  

The camera can detect severe changes in the image caused by actions such as 

repositioning the camera or painting over of the lens and generates an alarm to alert.
> Mark ENABLE checkbox to activate the tamper alarm. 
> DWELL TIME : Sets the time for the tamper alarm once detected.

> Mark ENABLE checkbox to input the alarm signal from the alarm-in port.
> TYPE : Lets the camera know the type of alarm contacts, NO=Normally Open & 
   NC=Normally Close.
> DWELL TIME : Sets the time for the alarm once detected by the alarm-in.

● 

Tamper

● 

Alarm In

Enables to user to set the event trigger optionally.

● 

Manual :

Summary of Contents for ICB-72A0003M0A






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands