manualshive.com logo in svg

Eneo ICB-72A0003M0A, User Manual

Share
Download
Eneo ICB-72A0003M0A User Manual Download Page 28

28

Full Menu Setup

• AUTOMATIC : Camera controls the exposure by the combination of the iris and the shutter.

●

 AE

> MODE : Selects how to control the exposure, AUTOMATIC, MANUAL, SHUTTER 

   PRIORITY or IRIS PRIORITY.

• MANUAL : Allows the user to set the exposure for the specific use in the unchanged

  illuminance.
• SHUTTER PRIORITY : Camera controls the exposure by the combination of the fixed

  shutter selected and the auto iris.

• IRIS PRIORITY : Camera controls the exposure by the combination of the automatic

  shutter and the selected iris level.

> IRIS : (Available only in MANUAL or IRIS PRIORITY mode) Sets the iris level. 

   Increasing the IRIS value opens the lens iris more but may lose the sharpness a little. 

   Too low value in IRIS may cause the erroneous focusing.
> AGC: (Available only in MANUAL mode) Sets the maximum gain automatically reachable

   at low light scene if DAY/NIGHT mode is set to other than AUTOMATIC. 

   Some models can select ON or OFF.

> MOTION DEBLUR : Reduces the blur of the moving object. If the horizontal band noise

   is observed in indoor under the florescent lights, set to OFF. 

> SHUTTER : (Available only in MANUAL or SHUTTER PRIORITY mode) 

   Sets the shutter to a fixed value.

> SLOW SHUTTER : Extends the shutter time over the maximum shutter at multiple times

   of value in SLOW SHUTTER. Increasing the values increases brightness but also

   increases blurriness.
> AUTO FLICKERLESS : Automatically detects and fixes the flickering image under

   fluorescent lighting caused by the mismatch between NTSC/PAL and 50Hz/60Hz

   electric power frequency.

Summary of Contents for ICB-72A0003M0A






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands