56
57
Set the Motion Detection of the Alarm Record page
1. When in the multi-device mode, select a desired channel to enable
this button, and click
to enter
the
Lan Camera Setup
page. (See the sample screen as in
A
above)
2. Click the
Alarm Record
to enter the
Motion Detection
of the
Alarm Record
page.
(See the sample screen as in
F
above)
3. Enables / disables the motion detection function.
4. Click and drag the mouse across a targeted zone to draw a red rectangle on the image (coordinates provided below).
5. Setup the signal level, and click the
OK
button to submit the new motion detection setting of the recording.
Set the FTP / SMTP / CF card of the Alarm Record page.
1. When in the multi-device mode, select a desired channel to enable
this button, and click
to enter
the
Lan Camera Setup
page. (See the sample screen as in
A
above)
2. Click the
Alarm Record
to enter the
FTP / SMTP
of the Alarm Record page. (See the sample screen as in
G
above)
3. Enables / disables to upload via FTP of the Alarm Record.
4. Input the Upload Rate of the image files as and when necessary.
5. Input the Alarm Duration as and when necessary.
6. Enables / disables to upload via SMTP of the Alarm Record.
7. Input the image file number as and when necessary.
8. Enables / disables to save images into CF card.
9. Set the
Image File Number
when necessary.
10. Click the
OK
button to submit the new FTP / SMTP setting of the recording.
Note: In addition, please be advised, the rule of the password character of ftp server accept A-Z, a-z, 0-9.
