54
55
Set the Settings of the Network page
3. When in the multi-device mode, select a desired channel to enable
this button, and click
to enter
the
Lan Camera Setup
page. (See the sample screen as in
A
above)
4. Click the
Network
to enter the
Network
page. (See the sample screen as in
B
above)
3. Check the box at the top to enable the DHCP (Dynamic Host Configuration Protocol) function if necessary.
Vary any of the network settings including the „Internet Address”, „Subnet Mask”, „DNS Server”, „Gateway”, and
the „HTTP Port Number” if and as necessary.
4. Input the FTP IP Address, User Name, and Password of the FTP Server; and set the Upload Path of the image files
when necessary.
5. Input the IP Address of the SMTP server; and set the recipient’s e-mail address when and as necessary.
6. Input the IP Address of the SNTP server; and choose one of the time zones as and when necessary.
7. Click the
OK
button to submit the new image setting.
Set the Settings of the System page
1. When in the multi-device mode, select a desired channel to enable
this button, and click
to enter
the
Lan Camera Setup
page. (See the sample screen as in
A
above)
2. Click the
System
to enter the
System
page. (See the sample screen as in
C
above)
3. Add, modify or delete any user’s data as and when necessary.
4. Choose one of the three modes shown on the page to set the Date and Time of the system.
The three modes are „Set Manually”, „Synchronize With Computer Time”, and „Synchronize With NTP Server”.
5. Click the
OK
button to submit the new image setting.
Set the Recording Schedule of the Record Mode page
1. When in the multi-device mode, select a desired channel to enable
this button, and click
to enter
the
Lan Camera Setup
page. (See the sample screen as in
A
above)
2. Click the
Record Mode
to enter the Schedule of the
Record Mode
page. (See the sample screen as in
D
above)
3. Select the
Time-period
from the corresponding drop-down list.
4. Select a desired
Date
.
5. Select a desired
Start Time
and
End Time
from the
Time Setting
, enter a specific
Hour : Minute
.
6. Click the
Add
button to set the schedule for recording for each day.
7. When all required settings are completed, click the
OK
button to submit the new image setting.
Set the FTP / CF card of the Record Mode page
1. When in the multi-device mode, select a desired channel to enable
this button, and click
to enter
the
Lan Camera Setup
page. (See the sample screen as in
A
above)
2. Click the
Record Mode
to enter the
FTP
of the
Record Mode
page. (See the sample screen as in
E
above)
3. Enables / disables to upload via FTP.
4. Set the
Upload Rate
of the image files when necessary.
5. Enables / disables to save images into CF card.
6. Set the
Image File Number
when necessary.
7. Click the
OK
button to submit the new FTP setting of the recording.
