１６
The position, which is marked with
*
, already has the preset view assigned. To review the stored
preset, press
PRST
key on the
*，
The camera will show the stored preset scene.
Hold down the
CTRL
key while selecting the desired scene using the
Joystick
. Current position
will be displayed. Release
CTRL
key to complete. Or Press
IRIS Open
then the “CTRL” displays.
Move the desired position and the zoom position. Press
IRIS Close
then the “CTRL” disappears.
Select Exit and push the
Joystick
to the right.
3.6 Shortcut of Preset Program
After selecting the desired scene, press No. (
1
to
160
), and press
CTRL
and
PRST
subsequently.
The current view will be stored to the selected preset number if the preset number is empty. If
selected preset number is not empty, “
OVER WRITE
” message will be displayed on the monitor
and select the “OK” and push the
Joystick
to the right to overwrite.
Example
:
1 , 0 , 1
+
CTRL
+
PRST
will store current view as preset No.
101
. In this case, focus
will be programmed as Auto, dwell time will be set to 3 second, and the current AE mode will be
programmed.
PRESET AREA SETUP
(CTRL KEY)
NUMBER 001
PAN TILT
000.0 000.0
EXIT(ESC TO EXIT)
Summary of Contents for EDCH/143E/C
Page 1: ...ALL IN ONE DOME CAMERA EDCH 143E C Instruction Manual...
Page 43: ......
