Operating Instructions
12
To upgrade the software, connect a USB device containing the
upgrade package file to the DVR. Highlight
Upgrade…
and press
the button. The
Upgrade
screen appears. The screen displays
the upgrade package file names that are available. The “
.rui
”
indicates that the file is for software upgrades and “
.ofi
” indicates
that the file is for optical drive firmware upgrades.
Select the desired file and press the button. Highlighting the
Install
button and pressing the button will install
the selected software package. Highlighting the
Cancel
button and pressing the button will close the window
without upgrading the software. If the upgrade package file is not installed on the DVR properly, you will get an error
message. The system restarts automatically after completing the upgrade.
CAUTION: The USB device must be FAT16 or FAT32 format.
You can import saved DVR settings or export the current DVR
settings. To import saved DVR settings, connect the USB device
containing the setup file (.dat) to the DVR. Highlight
Setup –
Import…
and press the button. Select the desired setup file and
press the
Import
button to import the selected settings and change
the DVR settings accordingly. Highlight
Include Network Setup
and press the button to toggle between On and Off. When set
to Off, the network settings will not be changed.
To export the current DVR settings, connect the USB device to the
DVR. Highlight
Setup – Export…
and press the button.
Highlight the box beside
File name
and press the button. A
virtual keyboard allows you to enter the file name. Selecting
Export
will save the current settings in .dat file format on the USB device.
NOTE: Even after changing the DVR settings by importing saved settings, the time-related settings (Date/Time,
Time Zone and Daylight Saving Time) will NOT be changed.
CAUTION: The USB device must be FAT16 or FAT32 format.
Highlight
Show System Log…
and press the button to display the System Log.
The System Log screen lists system activities (up to 5,000
from the latest) that have occurred along with the time and
date. The icon will be displayed in the last column for
system activities of the remote site. You can scroll through
the log pages by using the Up and Down arrows, or you can
go directly to a log page by entering the log page number in
the box at the bottom left of the screen. Highlight
Close
and
press the button to exit the screen.
To export the system log information, connect the USB device to
the DVR. Highlight
Export…
and press the button. Highlight
the box beside
File name
and press the button. A virtual keyboard
allows you to enter the file name. Selecting
Export
will save the
log information in .txt file format on the USB device.
NOTE: When opening the saved .txt file, setting to the proper character encoding and using fixed width fonts
will be required to read the file properly.
The box beside
Recorded Data – From / To
displays the time information of recorded data.