Digital Video Recorder
7
Figure 4 — Infrared remote control.
NOTE: For simplicity, the button descriptions in this manual refer to the front panel buttons.
Camera Buttons (1 to 16)
Pressing the individual camera buttons will cause the selected camera to display full screen. Buttons 1 to 9 are also
used to enter passwords.
In the PTZ mode, pressing the button 1 zooms in the screen and the button 2 zooms out the screen, pressing the button
3 focuses near and button 4 focuses far, and pressing the button 5 moves to the preset and button 6 saves the preset.
SPOT/DISPLAY Button
Pressing and holding the
SPOT/DISPLAY
button for three seconds or longer allows you to select which cameras will
display on the Spot monitor.
Pressing the button toggles between different display formats. The available formats are: PIP, 2x2, 3x3 and 4x4.
SEQUENCE/GROUP Button
Pressing and holding the
SEQUENCE/GROUP
button for three seconds or longer displays live channels sequentially.
When in the live mode, pressing the button changes the screen from the current camera group to the next camera group,
and the screen displays the page number.