6
Installation
Installation
For the operation of the EoC network camera, it is necessary to connect a BNC cable for
data transmission and power supply. This EoC network camera must use a dedicated
receiver capable of data transmission and power supply through BNC cable. Depending
on operation methods, it is possible to connect an alarm cable additionally. For its fixation
on different locations, please consult with an installer.
The network camera should be attached to a structural object, such as hard wood, wall
stud or ceiling rafter that supports the weight of the network camera. For its fixation on
different locations, please consult with an installer.
Installing and Adjusting Camera
1. Fix the base of the camera with the three screws provided in the accessory kit.
CAUTION:
Adjusting the position of the camera after installation could potentially dam-
age the cable.
3x Screws
Summary of Contents for 220932
Page 42: ...42...
Page 43: ...43 IT...
