10
Resetting to the factory default settings
To reset the network camera to the original factory settings, go to the Setup > System >
Maintenance web page (described in ”System > Maintenance” of Users Manual) or use the
Reset button on the network camera inside the bottom cap.
Using the Reset button:
Follow the instructions below to reset the network camera to the factory default settings
using the Reset button.
1. Switch off the network camera by disconnecting the power adapter.
2. Open the top cap.
3. Press and hold the Reset button with a straightened paperclip while reconnecting
the power.
4. Keep the Reset button pressed about 5 or more seconds.
5. Release the Reset button.
6. The network camera resets to factory default and restarts after completing the
factory reset.
7. Close the camera housing tightly to ensure waterproofness.
CAUTION:
When performing a Factory Reset, you will lose any settings that have been
saved. (Default IP 192.168.1.10 )
Reset Button
Summary of Contents for 220932
Page 42: ...42...
Page 43: ...43 IT...
