21
Version 1.7
English
5) Add Cleaning Solution and Water
Add the recommended cleaning solution
to the tank of water. To mix, run the agita-
tor inside the sprayer.
Operate for 5 - 10 minutes to mix the
cleaning solution with the water.
6) Let Sprayer Sit For 8 Hours
With the water and cleaning solution left
in the sprayer tank, let it sit for about
eight hours. This will allow the solution to
remove any herbicide from the residues
inside the tank.
7) Clean Nozzles, Screens, and Filters
It’s now time to rinse all nozzles, screens
and filters. To clean thoroughly, put them
in a bucket of cleaning agent and water.
8) Rinse Entire System with Water
When all nozzles, etc. are back in place,
give the entire system a complete rinse
to ensure all cleaning solution is flushed
through the unit.
For Your Safety, Watch Video:
blog.enduraplas.com/spraying
