Monitoring
the operating status using the multifunction display
Remote
start with E-MCS 5.0 (radio)
Status at: April 2016
45
6.4
Remote start with E-MCS 5.0 (radio)
The following requirements must be met:
checked and tested for electrical safety
there must be fuel in the tank.
an adequate oil level (for this, see the motor's operating
and maintenance manual
(see Figure 1-1-(2))
)
Adequate ventilation must always be available
Appliances switched off or disconnected
Remote start mode is activated as follows.
3.
Connect up the radio receiver.
4.
Press the AUTO button
(see Fig. 11-1)
so that remote start
mode is activated.
Remote start mode is active.
1.
press the
button on the radio impulse remote opera-
tion once.
the generator starts
1.
press the
button again.
The generator is off.
If the
symbol flashes red, the batteries on the remote
control must be replaced
Prerequisites
Remote start mode
START
STOP
STATUS OF the RADIO
IMPULSE REMOTE
OPERATION
