Monitoring
the operating status using the multifunction display
Radio
impulse remote start / remote start with cable remote
start / emergency power supply
Status at: April 2016
39
6
Monitoring the operating status using the
multifunction display
(only for radio remote start / remote start with cable remote
operation)
The function of the multifunctional display E-MCS 5.0 is de-
scribed in this section.
In order now to switch on the E-MCS 5.0 the START button
(Figure 11-1)
must be pressed once.
Fig. 5-1: Multifunction display E-MCS 5.0
The value can be read off in the lower part of the display.
The battery charging is monitored by the E-MCS 5.0 and a
fault message appears on the upper right in the display in
the case of a fault arising.
Operating hours:
Battery charge check:
Frequency:
