Teqwave T
Technical data
Hauser
47
14
Technical data
14.1
Application
The measuring device is designed exclusively for the measurement of the concentration
of liquids.
To ensure that the device remains in proper operating condition for its service life, only
use the measuring device for fluids to which the process-wetted materials are sufficiently
resistant (
49).
14.2
Function and system design
Measuring principle
Concentration measurement using acoustic surface waves.
Measuring system
For information on the structure of the device, see "Product description"
14.3
Input
Measured variables
Direct measured variable
• Temperature
Derived measured variable
• Concentration
Internal measured variable
The internal measured variables are used to calculate the concentration. The measuring
device does not show the measured variables on the local display.
• Speed of sound
• Density
Measuring ranges
14.4
Power supply
Supply voltage
The measuring device is powered by a built-in battery. The battery is charged via a USB port.
Requirements for the charger
Temperature
As per concentration app data sheet,
maximum 0 to +100 °C (32 to +212 °F)
Concentration
As per concentration app data sheet,
maximum 0 to 100 %
Speed of sound
(internal measured variable)
600 to 2000 m/s
Density
(internal measured variable)
0.7 to 1.5 g/cm³
Summary of Contents for Teqwave T
Page 54: ...www addresses endress com ...
