Endress+Hauser Teqwave T Operating Instructions Manual Download

Page: 49 / 54

Teqwave T

Technical data

Hauser

14.6

Environment

Ambient temperature

range

Storage temperature

Degree of protection

Electromagnetic

compatibility (EMC)

• According to IEC/EN 61326-1

• Complies with emission limit for industry as per EN 55011 (Class A)
For details, refer to the Declaration of Conformity.

14.7

Process

Medium temperature ran-

0 to +100 °C (+32 to +212 °F)

Flow velocity

Max. 5 m/s (16.4 ft/s)

14.8

Mechanical construction

Design, dimensions

For the dimensions and installation lengths of the device, see the "Technical Information"

document, "Mechanical construction" section.

Weight

Materials

Transmitter

Sensor

0 to +100 °C (+32 to +212 °F)

Transmitter

0 to +40 °C (+32 to +104 °F)

Sensor

-20 to +120 °C (-4 to +248 °F)

Transmitter

-20 to +60 °C (-4 to +140 °F)

Sensor

IP 68 (with cable plugged in)

Transmitter

IP 65

Transmitter

0.42 kg (0.93 lbs)

Sensor

0.3 kg (0.7 lbs)

Connecting cable

0.1 kg (0.2 lbs)

Housing

ABS plastic (acrylonitrile-butadiene-styrene copolymere)

Shockproof sealing

TPE plastic (thermoplastic elastomer)

Window material

Glass plate

Membrane keypad

• Front membrane: Autotex V150

• Bottom adhesive layer: DuploCOLL 101

USB connection

• Socket: brass, nickel-plated
• Contact housing: polyetheretherketone (PEEK)

• Contacts: brass, chrome-plated

Push-pull connection

• Socket: brass, nickel-plated
• Contact housing: polyetheretherketone (PEEK)

• Contacts: brass, chrome-plated

Summary of Contents for Teqwave T























































Search results

Summary of Contents for Teqwave T

Reviews:

Related manuals for Teqwave T

Brands by name

Popular brands

Endress+Hauser Teqwave T, Operating Instructions Manual

Search results

Summary of Contents for Teqwave T

Reviews:

Related manuals for Teqwave T

Brands by name

Popular brands