Operation options
Teqwave H
36
Hauser
Parameters
Description
Selection/entry/display
Factory setting
Gateway
Enter the IP address for a
gateway in the local
network.
Character string with the
format w.x.y.z
0.0.0.0
DHCP (transmitter)
Switch DHCP status
(Viewer)
Enable DHCP to allow the
DHCP server in the
network to automatically
assign the IP address for
the transmitter.
The function is only
available if the
transmitter has a
"system name" (also
known as the
"NetBIOS name").
Otherwise, the
Viewer cannot find
the transmitter in
the network. The
system name is
preconfigured when
the device is
delivered.
Enable or disable the
function
The function is disabled
Establishing a connection with the transmitter
1. Start the "Teqwave Viewer" operating tool.
2. Under "Teqwave Transmitter" → "Change transmitter": enter the IP address or system
name (Net-BIOS name) of the transmitter.
The measured values are displayed on the right of the graph and on the graphic
display.
8.3.4
User interface
Different functions are enabled or disabled in the menus depending on the license
purchased (Teqwave Viewer (basic package) or Teqwave Viewer (with interface for data
download). Disabled functions are grayed out and cannot be selected. The central element
on the start screen is a graph that displays the selected measured variables over the time
period. To the right of the graph, the user interface also shows all the measured variables,
the sensor status and the IP address of the transmitter.
