Endress+Hauser Smartec CLD18, Operating Instructions Manual

Page: 23 / 48

Smartec CLD18 Operation options
Hauser 23
7.1 Overview of operating options
E
A0029236
• Open the Configuration menu
• Confirm the entry
• Select a parameter or submenu
A0029235
Within the Configuration menu:
• Gradually select the specified menu items / characters for the
parameter
• Change the selected parameter
Outside the Configuration menu:
Display enabled and calculated channels, as well as minimum and
maximum values, for all the active channels.
Press both keys simultaneously (< 3 s) to quit the setup without
saving any changes.
Always quit menu items / submenus at the end of the menu via "x Back".
Symbols in the editing mode:
A0020597
Accept entry.
If this symbol is selected, the entry is applied at the position specified by the user, and you quit editing mode.
A0020598
Reject entry.
If this symbol is selected, the entry is rejected and you quit editing mode. The previously set text remains.
A0020599
Jump one position to the left.
If this symbol is selected, the cursor jumps one position to the left.
A0020600
Delete backwards.
If this symbol is selected, the character to the left of the cursor position is deleted.
A0020601
Delete all.
if this symbol is selected, the entire entry is deleted.