RN42
Technical data
Hauser
23
Service-specific accessories
Accessories
Description
Configurator
Product Configurator - the tool for individual product configuration
• Up-to-the-minute configuration data
• Depending on the device: Direct input of measuring point-specific information
such as measuring range or operating language
• Automatic verification of exclusion criteria
• Automatic creation of the order code and its breakdown in PDF or Excel output
format
• Ability to order directly in the Hauser Online Shop
The Configurator is available on the Hauser website at:
www.endress.com
-> Click "Corporate" -> Select your country -> Click "Products" -> Select the product
using the filters and search field -> Open product page -> The "Configure" button to
the right of the product image opens the Product Configurator.
Accessories
Description
W@M
Life cycle management for your plant
W@M offers assistance with a wide range of software applications over the entire
process: from planning and procurement to the installation, commissioning and
operation of the measuring devices. All the relevant information is available for
every measuring device over the entire life cycle, such as the device status, device-
specific documentation, spare parts etc.
The application already contains the data of your Hauser device.
Hauser also takes care of maintaining and updating the data records.
W@M is available:
Via the Internet:
www.endress.com/lifecyclemanagement
12.12 Certificates and approvals
For certificates and approvals valid for the device: see the data on the nameplate
Approval-related data and documents:
www.endress.com/deviceviewer
→ (enter the
serial number)
Functional safety
A SIL version of the device is optionally available. It can be used in safety equipment in
accordance with IEC 61508 up to SIL 2 (SC 3) .
Please refer to Safety Manual FY01034K for the use of the device in safety
instrumented systems according to IEC 61508.
12.13 Documentation
The following document types are available in the Downloads section of the Endress
+Hauser website (
www.endress.com/downloads
):
For an overview of the scope of the associated Technical Documentation, refer to the
following:
•
W@M Device Viewer
(
from the nameplate
•
Hauser Operations App
: Enter the serial number from the nameplate or
scan the matrix code on the nameplate
Brief Operating Instructions
(KA)
Guide that takes you quickly to the 1st measured value
The Brief Operating Instructions contain all the essential information from incoming
acceptance to initial commissioning.
Operating Instructions (BA)
Your reference guide
These Operating Instructions contain all the information that is required in various phases
of the life cycle of the device: from product identification, incoming acceptance and