Mounting
Prosonic T
12
Hauser
2.5
Installation hint
"
Caution!
Use only the screw-in piece to screw in the Prosonic T.
L00-FMU30xxx-17-00-00-xx-009
1
65 AF, max. torque 7 Nm (5.16 lbf ft)
2.6
Installation check
After installing the device, carry out the following checks:
• Is the device damaged (visual inspection)?
• Does the device correspond to the measuring point specifications for process temperature,
process pressure, ambient temperature, measuring range etc.
• If available: Are the measuring point number and labelling correct (visual inspection)?
• Is the measuring device sufficiently protected against precipitation and direct sunlight?
• Are the cable glands tightened correctly?
• After aligning the housing, check the process seal at the nozzle or flange.
65
1