Commissioning
Prosonic T
20
Hauser
5
Commissioning
5.1
Function check
Make sure that all final checks have been completed before you start up your measuring point:
• Checklist
• Checklist
5.2
Switching on the measuring device
After switching on the supply voltage, the instrument is first initialised. Then the following
appear for approximately five second:.
• Device type
• Software Version
Step
Function
Remarks
1
→
language
Select the language
(this message appears the first time the instrument is switched on)
2
→
distance unit
Select the basic unit
(this message appears the first time the instrument is switched on)
3
→
measured value
The current measured value is displayed.
This function displays the current measured value in the selected unit
(see "
customer unit
"
(042)
function). The number of digits after decimal point
can be selected in the "
no.of decimals
"
(095)
function.
For details, see the documentation BA00388F "Prosonic T - Description of
Instrument Functions" on the CD-ROM provided.
4
→
group selection
After E is pressed, you reach the group selection.
This selection enables you to perform the basic setup
