Prosonic Flow 92
4 Wiring
Hauser
27
4
Wiring
4.1
Connecting the sensor connecting cable
4.1.1
Connecting Prosonic Flow W, P, U sensors
Fig. 22:
Connection of the flow sensors of the measuring system
A = View A
1 = Upstream sensor cable
2 = Downstream sensor cable
4.1.2
Cable specifications
Sensor cable
• Special type coaxial cable.
• Use the ready-to-use cables supplied by E+H with each sensor pair.
• The cables are available in lengths of 5 m and 10 m.
• The W, U sensors are connected by means of the BNC-connector plugs (IP 54).
"
Caution!
See special notes in Section 4.4 “Degree of protection” on Page 33.
Operation in zones of severe electrical interference:
The measuring device complies with the EMC requirements in accordance with
EN 61326/A1.
F
0
6
-9
2
x
x
xxxx-
0
4
-0
6
-0
6
-x
x
-0
0
1
Summary of Contents for prosonic flow 92
