Endress+Hauser Proline Prowirl R 200, Brief Operating Instructions

Page: 20 / 56

Installation Proline Prowirl R 200
20 Hauser
6.2.3 Mounting the measuring device
! WARNING
Danger due to improper process sealing!
‣
Ensure that the inside diameters of the gaskets are greater than or equal to that of
the process connections and piping.
‣
Ensure that the gaskets are clean and undamaged.
‣
Install the gaskets correctly.
1. Ensure that the direction of the arrow on the nameplate of the sensor matches
the flow direction of the fluid.
2. Install the measuring device or turn the transmitter housing so that the cable
entries do not point upwards.

A0013964
6.2.4 Mounting the sensor
! WARNING
Danger due to improper process sealing!
‣
Ensure that the inside diameters of the gaskets are greater than or equal to that of
the process connections and piping.
‣
Ensure that the gaskets are clean and undamaged.
‣
Install the gaskets correctly.
1. Ensure that the direction of the arrow on the sensor matches the flow direction
of the medium.
2. To ensure compliance with device specifications, install the measuring device
between the pipe flanges in a way that it is centered in the measurement section.
3. Install the measuring device or turn the transmitter housing so that the cable
entries do not point upwards.

A0013964