Proline Promass 40E
34
Hauser
Operability
Local display
Display elements
• Liquid-crystal display: backlit, two lines with 16 characters per line
• Selectable display of different measured values and status variables
• At ambient temperatures below –20 °C (–4 °F) the readability of the display may be impaired.
Languages
Display languages: French, Spanish, Italian, Dutch, Portuguese, German, English
Remote operation
• HART protocol (handheld communicator)
• Configuration and service software or "FieldCare" from Hauser
• AMS configuration programs (Fisher Rosemount), SIMATIC PDM (Siemens)
Certificates and approvals
CE mark
The measuring system is in conformity with the statutory requirements of the EC Directives.
Hauser confirms successful testing of the device by affixing to it the CE mark.
C-Tick symbol
The measuring system complies with the EMC requirements of the "Australian Communications and
Media Authority (ACMA)"
Ex approval
Information about currently available Ex versions (ATEX, FM, CSA, IECEx, NEPSI etc.) can be supplied
by your Hauser Sales Center on request. All information relevant to explosion protection is
available in separate Ex documents that you can order as necessary.
Hygienic compatibility
3A approval
Pressure Equipment Directive
Measuring devices with a nominal diameter smaller than or equal to DN 25 correspond to Article 3(3)
of the EC Directive 97/23/EC (Pressure Equipment Directive) and have been designed and
manufactured according to good engineering practice. For larger nominal diameters, optional
approvals according to Cat. II/III are available when required (depends on fluid and process pressure).
Other standards and
guidelines
• EN 60529
Degrees of protection by housing (IP code)
• EN 61010-1
Protection Measures for Electrical Equipment for Measurement, Control, Regulation and Laboratory
Procedures
• IEC/EN 61326
"Emission in accordance with Class A requirements". Electromagnetic compatibility (EMC
requirements)
• NAMUR NE 21
Electromagnetic compatibility (EMC) of industrial process and laboratory control equipment
• NAMUR NE 43
Standardization of the signal level for the breakdown information of digital transmitters with analog
output signal
• NAMUR NE 53
Software of field devices and signal-processing devices with digital electronics
