Technical data
Proline Promag L 400 HART
140
Hauser
Process connections
EN 1092-1 (DIN 2501)
• DN
£
300 (12"): 1.0038 (S235JRG2), 1.4301/304, 1.4306/304L, 1.4307/304L
• DN
³
350 (14"): 1.0038 (S235JRG2), A105
ASME B16.5
• DN
£
300 (12"): A105, 316L
• DN
³
350 (14"): A105
AWWA C207
DN 1200 to 2200 (48 to 90"): 1.0044 (S275JR), 1.0425/316L (P265GH), A105, A181
AS 2129
DN 350 to 1200 (14 to 48"): 1.0038 (S235JRG2), 1.0345 (P235GH), 1.0425/316L (P265GH),
A105, FE 410 WB
AS 4087
DN 350 to 1200 (14 to 48"): 1.0044 (S275JR), 1.0425/316L (P265GH), A105
Seals
In accordance with DIN EN 1514-1
Accessories
Weather protection cover
Stainless steel 1.4301
Ground disks
1.4435/316L, Alloy C-22
Fitted electrodes
Measurement, reference and empty pipe detection electrodes available as standard with:
• 1.4435/304L
• Alloy C-22
Process connections
Flange connections:
• EN 1092-1 (DIN 2501)
– DN
£
300 (12"), lap joint flange (PN 10/16); lap joint flange, stamped plate (PN 10) = form A
– DN
³
350 (14"), fixed flange (PN 6/10) = flat face
• ASME B16.5
– DN
£
300 (12"), lap joint flange (Class 150)
– DN
³
350 (14"), fixed flange (Class 150)
• AWWA C207
DN 1200 to 2200 (48 to 90"), fixed flange (Class D)
• AS 2129
DN 350 to 1200 (14 to 48"), fixed flange (Table E)
• AS 4087
DN 350 to 1200 (14 to 48"), fixed flange (PN 16)
For information on the materials of the process connections (
