Proline Promag 50P, 53P
36
Hauser
Certificates and approvals
Ex approvals
Information about currently available Ex versions (ATEX, FM, CSA) can be supplied by your Hauser
Sales Centre on request. All explosion protection data are given in a separate documentation which is available
upon request.
CE mark
The measuring system is in conformity with the statutory requirements of the EC Directives. Hauser
confirms successful testing of the device by affixing to it the CE mark.
C-Tick mark
The measuring system is in conformity with the EMC requirements of the Australian Communications
Authority (ACA).
Pressure Equipment Directive
Flow meters with a nominal diameter smaller or equal DN 25 are covered by Art. 3(3) of the European directive
97/23/EG (Pressure Equipment Directive) and are designed according to sound engineer practice.
For larger nominal diameter, optional approvals according to Cat. III are available when required (depends on
fluid and process pressure).
PROFIBUS DP/PA
certification
The flow device has successfully passed all the test procedures carried out and is certified and registered by the
PNO (PROFIBUS User Organisation). The device thus meets all the requirements of the following specifica-
tions:
• Certified to PROFIBUS PA, profile version 3.0 (device certification number: on request)
• The device can also be operated with certified devices of other manufacturers (interoperability)
FOUNDATION Fieldbus
certification
The flow device has successfully passed all the test procedures carried out and is certified and registered by the
Fieldbus Foundation. The device thus meets all the requirements of the following specifications:
• Certified to FOUNDATION Fieldbus Specification
• The device meets all the specifications of the FOUNDATION Fieldbus H1.
• Interoperability Test Kit (ITK), revision status 4.0 (device certification number: on request)
• The device can also be operated with certified devices of other manufacturers
• Physical Layer Conformance Test of the Fieldbus Foundation
MODBUS certification
The measuring device meets all the requirements of the MODBUS/TCP conformity test and has the
“MODBUS/TCP Conformance Test Policy, Version 2.0”. The measuring device has successfully passed all the
test procedures carried out and is certified by the “MODBUS/TCP Conformance Test Laboratory” of the
University of Michigan.
Other standards, guidelines
EN 60529:
Degrees of protection by housing (IP code)
EN 61010:
Protection Measures for Electrical Equipment for Measurement, Control, Regulation and
Laboratory Procedures.
EN 61326/A1 (IEC 6326):
Electromagnetic compatibility (EMC requirements)
NAMUR NE 21:
Electromagnetic compatibility (EMC) of industrial process and laboratory control equipment.
NAMUR NE 43:
Standardisation of the signal level for the breakdown information of digital transmitters with analogue
output signal.
NAMUR NE 53
Software of field devices and signal-processing devices with digital electronics.
