Connecting the Nivocompact with Electronic Insert EC 42
(Three-Wire PNP) for DC
Transistor Circuit for Load
The load connected to Terminal 3 is switched by a transistor, contactless
and therefore without bounce.
Terminal 3 has a
positive
signal in normal switching mode.
The transistor is blocked on level alarm or with a power failure.
Protection Against Voltage Peaks
Connecting to an instrument with a high inductance:
a voltage limiter should be connected.
Fig. 11
Connecting the Nivocompact with electronic
insert EC 42 (PNP connection)
F:
Fine-wire fuse, load-dependent
R:
Connected load, e.g. PLC, PCS, relay
M:
Ground connection to silo or
metal parts near to the silo
E:
Grounding
Connection
15
Summary of Contents for nivocompact FTC 831
Page 2: ......
Page 4: ...Nivocompact FTC 831 2...
Page 7: ...Fig 2 Dimensions Nivocompact FTC 831 Technical Data 5...
Page 31: ......
