Micropilot S FMR540 4 to 20 mA HART
Commissioning
Hauser
53
6.4.2
Envelope curve with VU331
After the basic setup, an evaluation of the measurement with the aid of the envelope curve
(function group "
envelope curve
"
(0E)
) is recommended.
Function "plot settings" (0E1)
Select which information will be displayed in the LCD:
•
envelope curve
• env.curve+FAC (on FAC see BA00341F/00/EN)
• env.curve+cust.map (i.e. customer tank map is also displayed)
Function "recording curve" (0E2)
This function defines whether the envelope curve is read as a
•
single curve
or
• cyclic.
!
Note!
If the cyclical envelope curve is active in the display, the measured value is refreshed in a slower
cycle time. It is therefore recommended to exit the envelope curve display after optimising the
measuring point.
⇒
E HAUSER
E
+
–
⇒
E HAUSER
E
+
–
