Micropilot S FMR 533
6 Commissioning
Hauser
49
6.4
Basic Setup with the VU 331
Function "measured value" (000)
This function displays the current measured value in the selected unit
(see "
customer unit
"
(042)
function). The number of digits after decimal point can be
selected in the "
no.of decimals
"
(095)
function. The length of the bargraph corresponds
to the percental value of the present measured value with regard to the span.
6.4.1
Function group "basic setup" (00)
Function "tank shape" (002)
This function is used to select the tank shape.
Selection:
•
dome ceiling
•
horizontal cyl
•
bypass
•
stilling well
•
flat ceiling
(Typical ceiling of storage tanks: a slight slope of only a few degrees can
be neglected.)
•
sphere
⇒
⇒
⇒
L00-F
M
R230x
x
-14-00-00-en-007
