Endress+Hauser Micropilot FMR10 Operating Instructions Manual Download Page 13

Page: 13 / 72

Micropilot FMR10

Installation

Hauser

Installation

5.1

Installation conditions

5.1.1

Installation types

A0028892

 3

Wall, ceiling or nozzle installation

Wall or ceiling mount, adjustable

Mounted at front thread

Mounted at rear thread

Ceiling installation with counter nut (included in delivery)

Horizontal installation in confined spaces (sewer shaft)

Shaft wall mounting

Caution!

• The sensor cables are not designed as supporting cables. Do not use them for

suspension purposes.

• Always operate the device in a vertical position in free-space applications.

5.1.2

Nozzle mounting

The antenna should project out of the nozzle for optimum measurement. The interior of

the nozzle must be smooth and may not contain any edges or welded joints. The edge of

the nozzle should be rounded if possible.

A0028843

 4

Nozzle mounting

Nozzle length

Nozzle diameter

Summary of Contents for Micropilot FMR10









































































Search results

Summary of Contents for Micropilot FMR10

Reviews:

Related manuals for Micropilot FMR10

Brands by name

Popular brands

Endress+Hauser Micropilot FMR10, Operating Instructions Manual

Search results

Summary of Contents for Micropilot FMR10

Reviews:

Related manuals for Micropilot FMR10

Brands by name

Popular brands