Endress+Hauser Liquiline To Go Ex CYM291, Operating Instructions Manual

Page: 37 / 64

37
pH Oxy Cond
Data Logger
Starting the Data Logger using CONT
Prerequisite: Data logger is configured. Every time the meter has been switched off,
the data logger must be restarted (exception: SHOT).
Measurement
Measured value is maintained
Logger: CONT blinks
Address of the last recorded value
+ 1 blinks
(proposed start address) If desired: Select start address using
st
.
The measured value is saved to the selected start address (exception: SHOT).
“… FREE MEMORY” is displayed.
“LOGGER” and “active logger type” icons are displayed.
Starting the Data Logger using START
Prerequisite: Data logger is configured. All existing entries are deleted.
The start address for saving the values is 0001. Every time the meter has been
switched off, the data logger must be restarted (exception: SHOT).
Measurement
Measured value is maintained
Logger: CONT blinks
t
Logger: START blinks
All entries will be deleted. “5000 FREE MEMORY” is displayed.
“LOGGER” and “active logger type” icons are displayed.
Data Logger