Operating menu and parameter description
iTHERM TrustSens TM371, TM372
100
Hauser
Factory setting
0
Additional information
The measured value can only be transmitted via the current value is the address is set to
"0". The current is fixed at 4.0 mA for all other addresses (Multidrop mode).
No. of preambles
Navigation
Expert → Communication → HART configuration → No. of preambles
Description
Use this function to define the number of preambles in the HART telegram.
User entry
5 to 20
Factory setting
5
Configuration changed
Navigation
Expert → Communication → HART configuration → Configuration changed
Description
Indicates whether the configuration of the device has been changed by a master (primary
or secondary).
"HART info" submenu
Device type
Navigation
Expert → Communication → HART info → Device type
Description
Use this function to view the device type with which the device is registered with the HART
FieldComm Group. The device type is specified by the manufacturer. It is needed to assign
the appropriate device description file (DD) to the device.
Display
4-digit hexadecimal number
Factory setting
0x11CF
Device revision
Navigation
Expert → Communication → HART info → Device revision
Summary of Contents for iTHERM TrustSens TM371
Page 2: ......
Page 106: ...www addresses endress com ...