Identification
TMT125
28
Hauser
2.2
Scope of delivery
The scope of delivery comprises:
• Temperature transmitter (as DIN rail adapter or attached in an aluminum field housing)
• Multi-language hard copy of Brief Operating Instructions
• Operating Instructions on CD-ROM
• Delivery note
• Safety Instructions for use in hazardous areas (Ex approval), on CD-ROM as well
!
Note!
Please note the accessories of the device in the chapter ’accessories’ from the Operating
Instruction on the CD-ROM.
2.3
Certificates and approvals
CE mark, declaration of conformity
The temperature transmitter is designed to meet state-of-the-art safety requirements, has been
tested and left the factory in a condition in which it is safe to operate. The device complies with
the applicable standards and regulations in accordance with IEC 61 010 “Safety Requirements
for Electrical Equipment for Measurement, Control and Laboratory Use”.
The device described in these Operating Instructions is therefore in conformity with the
statutory requirements of the EU Directives. The manufacturer confirms a positive completion
of all tests by fitting the unit with a CE mark.
Device certification FOUNDATION Fieldbus™
The temperature transmitter has successfully passed all the test procedures implemented and has
been certified and registered by the FOUNDATION Fieldbus™. The measuring device thus
meets all the requirements of the following specifications:
• Certified to fieldbus specification, revision status 4.61
• Device certification number: IT035400
• The measuring device meets all the specifications of FOUNDATION Fieldbus-H1
(www.fieldbus.org).
• The measuring device may also be operated with certified devices from other manufacturers
(interoperability).
An overview of other approvals and certificates can be found in the Operating Instructions on
CD-ROM.
