Flowfit CUA252
Installation
Hauser
9
No measures to increase pressure are required for branch pipes that branch off from the
main pipe.
a0022259
Fig. 3: Connection
example
involving an open outlet
The inlet and outlet connection of the flow assembly are always identical, the system is
symmetrical.
Install the flow assembly vertically.
The supply must be connected at the bottom (upward flow in the pipe).
Avoid buckles and loops in the hose system.
Pay attention to the installation instructions (flow direction) for the sensor.
Many fluids tend to develop gas bubbles in a depressurized state.
Operating the flow assembly under pressure (adjustable valve after the flow assembly)
prevents this behavior in many cases.
