Endress+Hauser Flowfit CUA252, Operating Instructions Manual

Page: 6 / 24

Incoming acceptance and product identification Flowfit CUA252
6 Hauser
2 Incoming acceptance and product
identification
2.1 Incoming acceptance
• Make sure the packaging is undamaged!
• Notify the supplier of any damage to the packaging. Keep the damaged packaging until the
matter has been settled.
• Make sure the contents are not damaged!
• Notify the supplier of any damage to the delivery contents. Keep the damaged products
until the matter has been settled.
• Check the delivery to make sure nothing is missing. Compare it against the shipping
documents and your order.
• Pack the product for storage and transportation in such a way that it is reliably protected
against impact and moisture. The original packaging offers the best protection.
Furthermore, the permitted ambient conditions must also be observed (see "Technical
data").
• If you have any questions, contact your supplier or your local sales center.
2.2 Product identification
2.2.1 Nameplate
You can find the following information on the nameplate:
• Manufacturer details
• Order code
• Extended order code
• Serial number
• Operating conditions
• Safety information symbols
Compare the order code on the nameplate with your order.
2.2.2 Identifying the product
The order code and serial number of your device can be found in the following locations:
• On the nameplate
• In the shipping documents
To discover what product version you have, enter the order code on the nameplate into
the search screen at the following address:
www.products.endress.com/order-ident
2.3 Scope of delivery
The scope of delivery comprises:
• 1 Flowfit CUA252 flow assembly in the version ordered
• 1 Set of Operating Instructions BA01281C/07/EN
If you have any questions, contact your supplier or your local sales center.
2.4 Certificates and approvals
Declaration of Conformity
The product meets the requirements of the harmonized European standards.
As such, it complies with the legal specifications of the EC directives.
The manufacturer confirms successful testing of the product by affixing to it the
4
mark.