Endress+Hauser EngyVolt RV12, Operating Instructions Manual

Page: 28 / 64

Technical data EngyVolt RV12
28
10 Technical data
10.1 Input
Measured variable Measured process variables
Current (L1, L2, L3,), voltage (L1/N, L2/N, L3/N or L1/L2, L2/L3, L3/L1 respectively),
frequency in low-voltage systems
Calculated process variables
EngyVolt RV12: active, reactive and apparent power, power factor (Cos-Phi), imported and
exported active and reactive energy, total harmonic distortion (current L1, L2, L3; voltage
L1/N, L2/N, L3/N or L1/L2, L2/L3, L3/L1 respectively), neutral current, max. current (L1,
L2, L3, N)
1)
, max. active power
1)
.
EngyVolt RV15: active, reactive and apparent power, total harmonic distortion (current L1,
L2, L3; voltage L1/N, L2/N, L3/N or L1/L2, L2/L3, L3/L1 respectively), active and reactive
energy, neutral current, max. current (L1, L2, L3, N)
1)
, max. active power
1)
.
Measuring range
Nominal voltage 100 to 289 V AC L-N (173 to 500 V AC L-L)
Voltage measuring range 25 to 600 V
Maximum short-duration
overvoltage 2 x nominal voltage for 1-second application repeated 5 times in 5-minute
intervals
Nominal current (secondary) 5 A AC RMS
Secondary current measuring
range 0.05 to 6 A
Maximum short-duration
overcurrent 10 x nominal current for 1-second application repeated 5 times in 5-minute
intervals
Primary current measuring
range 1 to 9 999 A (per phase)
Frequency 45 to 66 Hz
Nominal power (secondary) 1 445 W (3-phase 4 325 W)
Power measuring range
(secondary) 14.45 to 2 080 W (3-phase: 43.25 to 6 228 W)
1)
Power measuring range
(primary) 5 to 12 450 000 W (12.45 MW)
1)
Power consumption voltage
circuits <0.2 VA per phase
Power consumption current
circuits <0.6 VA per phase
1) depending on CT
Energy counter 0 to 9 999 999.9 Wh, kWh, MWh / varh, kvarh, Mvarh
1) calculated from the integrated averages and representation as maximum value over an adjustable interval of 5, 8, 10, 15, 20, 30, 60 min