Endress+Hauser easytemp TSM 470 F, Operating Instructions Manual

Page: 22 / 28

Technical Data Compact RTD transmitter
22 Hauser
Connections used on Milk and Milk Products Equipment, Number 74-02". The 20 micro-
inch maximum is defined in "ASME BPE-2002, Bioprocessing Equipment".
Polishing Procedures
The wetted surfaces of the sensors and sanitary fittings are mechanically polished to
achieve a 32 micro-inch maximum surface finish, in accordance with 3-A Standard
Number 74-02. Minimal material has been removed to achieve the indicated surface
finish. Residual polishing compounds are removed after polishing operations are
completed on all surfaces and sanitary end fittings. The end fitting material and sensor
sheath are both composed of 316L stainless steel.
The wetted surfaces of the sensors and sanitary fittings are electropolished to achieve
a 20 micro-inch maximum surface finish, in accordance with ASME BPE-2002. All
electropolished surfaces have not undergone any passivation. Minimal material has
been removed to achieve the indicated surface finish. The end fitting material and
sensor sheath are both composed of 316L stainless steel.
Packaging Sanitary sensors and fittings are individually bagged and sealed to ensure cleanliness
upon delivery to the final customer.
Weight
Material Transmitter housing: stainless steel (SST).
Wetted parts: SS 316L (1.4404).
L in Inches (mm) 3¼" (82.55) 5¼" (133.35) 8¼" (209.45)
TSM470G 95 g 103 g 115 g
L in Inches (mm) 2" (50.8) 4" (101.6) 6" (152.4)
TSM470F-_B1 141 g 151 g 161 g
TSM470F-_B2 161 g 188 g 215 g
TSM470F-_C1 198 g 208 g 218 g
TSM470F-_C2 218 g 245 g 272 g
L in Inches (mm) ¾" (19.05) 1¼" (31.75) 2¾" (31.75)
TSM470P 67 g 69 g 72 g