Technical data
Dosimass
38
Hauser
10.1.10 Mechanical construction
Design / dimensions
The dimensions and lengths of the sensor and transmitter are provided in the separate "Technical
Information" document on the device in question. This can be downloaded as a PDF file
from www.endress.com. A list of the "Technical Information" documents available is provided in
the "Documentation" section
Weight
Material
• Transmitter housing: 1.4308/304
• Sensor housing: Acid and alkali-resistant outer surface; stainless steel 1.4301/304
• Housing seal: EPDM
• Process connection:
– Tri-Clamp
stainless steel 1.4404/316L
– Flange connections EN (DIN)
stainless steel 1.4404/316L/316
– DIN 32676 (clamp)
stainless steel 1.4435/316L
– Sanitary connection DIN 11851
stainless steel 1.4404/316L
– Threaded joint DIN 11864-1
stainless steel 1.4404/316L
– Threaded joint ISO 2853
stainless steel 1.4404/316L
– Sanitary connection SMS 1145
stainless steel 1.4404/316L
• Measuring tubes: Stainless steel 1.4539/904L
• Seals: Welded process connections without internal seals
Material load diagram
The material load curves (pressure-temperature diagrams) for the process connections are to be
found in the following documents:
Technical Information Dosimass (TI00065D/06/EN)
Process connection
Sanitary connections:
• Tri-Clamp
• threaded joints (DIN 11851, SMS 1145, ISO 2853, DIN 11864-1)
10.1.11 Operability
Display elements
Dosimass does not have a display or display elements.
Remote operation
Operation takes place via the "FieldCare" configuration and service program from Hauser.
This can be used to configure functions and read off measured values.
DN in mm (inch)
8 (3/8")
15 (½")
25 (1")
Weight in kg (lbs)
3.5 (7.7)
4.0 (8.8)
4.5 (9.9)
