Accessories
CleanFit CPA 451
18
Hauser
6
Accessories
6.1
Accessories kits
❑
Ball valve for rinse connection; order no. 51512982
❑
O-ring set, Viton; order no. 51512981
6.2
Sensors
❑
OrbiPac W CPF 81/82
compact electrode for pH and ORP measurements
Application: wastewater treatment, drinking water and condensate conditioning
ordering acc. to product structure, see Technical Information
!
Hinweis!
The following versions are not applicable:
– CPF81-xx3 with 58 mm (2.28") immersion depth
– CPF82-xx3 with 58 mm (2.28") immersion depth
C07-CPF81xxx-00-05-06-xx-001.eps
Fig. 18:
OrbiPac W CPF 81
6.3
Welded fitting
❑
Welded fitting for pipe diameters of more than 80 mm (3.15"), with combination flange
DN 50 / ANSI 2":
– Bore holes for DN 50 flange: 4 x 90° Ø18 (0.71") on hole circle Ø125 (4.92")
– Bore holes for ANSI 2" flange: 4 x 90° Ø19 (0.75") on hole circle Ø121 (4.76")
Flange seal, 4 screws M16x60, 4 nuts M16 incl. washers, stainless steel 1.4571
(AISI 316Ti);
order no. 50080249
C07-CUA451xx-00-07-00-en-001.eps
Fig. 19:
Welded fitting
D:
Marks for the bore holes of the DN 50 flange
D
D
D
D
M16x60
75 / 2.95
93 / 3.66
Ø 165 / 6.50
mm / inch
Summary of Contents for CleanFit CPA 451
Page 2: ......
