Endress+Hauser Cerabar PMC11 Technical Information Download Page 43

Page: 43 / 52

Cerabar PMC11, PMC21, PMP11, PMP21

Hauser

Certificates and approvals

CE mark

The device meets the legal requirements of the relevant EC directives. Hauser confirms that

the device has been successfully tested by applying the CE mark.

RoHS

The measuring system complies with the substance restrictions of the Restriction on Hazardous

Substances Directive 2011/65/EU (RoHS 2).

RCM-Tick marking

The supplied product or measuring system meets the ACMA (Australian Communications and Media

Authority) requirements for network integrity, interoperability, performance characteristics as well

as health and safety regulations. Here, especially the regulatory arrangements for electromagnetic

compatibility are met. The products are labelled with the RCM- Tick marking on the name plate.

A0029561

EAC conformity

The PMC21, PMP21 and PMP23 devices meet the legal requirements of the applicable EAC

directives. These are listed in the corresponding EAC Declaration of Conformity along with the

standards applied.
Hauser confirms successful testing of the device by affixing to it the EAC mark.

Approval

CSA C/US General Purpose

Safety Instructions (XA)

Depending on the approval, the following Safety Instructions (XA) are supplied with the device. They

are an integral part of the Operating Instructions.

Device

Directive

Documentation

Option

PMP21

ATEX II 1/2G Ex ia IIC T4 Ga/Gb

XA01271P

PMC21

ATEX II 2G Ex ia IIC T4 Gb

XA01271P

PMC21
PMP21

ATEX II 3G Ex ec IIC T4 Gc

XA01533P

PMC21
PMP21

FM IS Cl. I, Div.1 Gr. A-D T4

XA01321P

PMC21
PMP21

CSA C/US IS Cl. I Div. 1 Gr. A-D

XA01322P

PMC21
PMP21

EAC Ex ia IIC T4 Ga/Gb

XA01540P

PMC21
PMP21

IEC Ex ia IIC T4 Ga/Gb

XA01271P

PMC21
PMP21

NEPSI Ex ia IIC T4

XA01363P

PMC21
PMP21

TIIS Ex ia IIC T4

In preparation

Product Configurator order code for "Approval"

The nameplate indicates the Safety Instructions (XA) that are relevant to the device.

Summary of Contents for Cerabar PMC11





















































Search results

Summary of Contents for Cerabar PMC11

Reviews:

Related manuals for Cerabar PMC11

Brands by name

Popular brands

Endress+Hauser Cerabar PMC11, Technical Information

Search results

Summary of Contents for Cerabar PMC11

Reviews:

Related manuals for Cerabar PMC11

Brands by name

Popular brands