Endress+Hauser Cerabar PMC11 Technical Information Download Page 26

Page: 26 / 52

Cerabar PMC11, PMC21, PMP11, PMP21

Hauser

Environment

Ambient temperature range

Device

Ambient temperature range

PMC11
PMP11

–40 to +70 °C (–40 to +158 °F)

PMC21
PMP21

–40 to +85 °C (–40 to +185 °F)

PMC21
PMP21

Devices for hazardous areas: –40 to +70 °C (–40 to +158 °F)

Exception: the following cable is designed for an ambient temperature range of
–25 to +70 °C (–13 to +158 °F): Product Configurator order code for "Enclosed accessories" option "RZ".

Storage temperature range

–40 to +85 °C (–40 to +185 °F)

Climate class

Device

Climate class

Note

PMC11
PMP11
PMC21
PMP21

Class 3K5

Air temperature: –5 to +45 °C (+23 to +113 °F),
relative humidity: 4 to 95 %
satisfied according to IEC 721-3-3 (condensation not possible)

Degree of protection

Device

Connection

Degree of protection

Option

PMP21
PMP21

Cable5 m (16 ft)

IP66/68

NEMA type 4X/6P enclosure

PMP21
PMP21

Cable10 m (33 ft)

IP66/68

NEMA type 4X/6P enclosure

PMP21
PMP21

Cable25 m (82 ft)

IP66/68

NEMA type 4X/6P enclosure

PMC11
PMP11

M12 plug

IP65 NEMA type 4X enclosure

PMC21
PMP21

M12 plug

IP65/67 NEMA type 4X enclosure

PMC11
PMP11
PMC21
PMP21

Valve plug ISO4400 M16

IP65 NEMA type 4X enclosure

PMC11
PMP11
PMC21
PMP21

Valve plug ISO4400 NPT ½

IP65 NEMA type 4X enclosure

Product Configurator order code for "Electrical connection"

IP 68 (1.83m H2O for 24 h)

Vibration resistance

Test standard

Vibration resistance

IEC 60068-2-64:2008

Guaranteed for 5 to 2000Hz: 0.05g

/Hz

Electromagnetic

compatibility

• Interference emission as per EN 61326-1 equipment B

• Interference immunity as per EN 61326-1 (industrial environment)

• NAMUR recommendation EMC (NE21)

• Maximum deviation: 1.5% with TD 1:1
For more details please refer to the Declaration of Conformity.

Summary of Contents for Cerabar PMC11





















































Search results

Summary of Contents for Cerabar PMC11

Reviews:

Related manuals for Cerabar PMC11

Brands by name

Popular brands

Endress+Hauser Cerabar PMC11, Technical Information

Search results

Summary of Contents for Cerabar PMC11

Reviews:

Related manuals for Cerabar PMC11

Brands by name

Popular brands