Endress+Hauser ASP Station 2000 peristaltic, Operating Manual

Page: 87 / 200

ASP station 2000 peristaltic Operation
Hauser 87
5.2.2 Key assignment
The assignment of the function keys is as follows:
Fig. 21: Key assignment
5.3 Local operation
5.3.1 Enable configuration
If necessary, enter the 4-digit user code
→
Chap. 5.3.2.
5.3.2 Lock configuration
Configuration of the device can be locked by entering a 4-digit user code at the control console (see
"Description of device functions"). The user code is entered in the
SETUP - BASIC SETTINGS
menu level under the CODE function.
5.4 Confirming error messages
Acknowledge error messages on the controller display by pressing the operating key beneath the OK
field.
5.5 Communication using ReadWin
®
2000
Besides by means of local operation, you can also remotely configure the device and poll measured
values using a PC with the Hauser operating software ReadWin
®
2000. ReadWin
®
2000
is a universal PC programme for remote device operation. The interface for remote configuration is
the RS232 connection socket (see Fig. 12, item A). You can find detailed information on operating
the device using ReadWin
®
2000 on the CD-ROM with the device software supplied.
!
Note!
ReadWin
®
2000 version 1.16.0.0 or higher has to be installed for remote device configuration
5.6 Calibration
5.6.1 Sample volume calibration
You must calibrate the sample volume if:
• The volume configured in the controller does not match the sample quantity taken
• Or the pump hose has been changed.