Endress+Hauser ASP Station 2000 peristaltic, Operating Manual

Page: 110 / 200

Commissioning ASP station 2000 peristaltic
110 Hauser
Switch (only for an
active switching
programme) Set
↵
Programme selection
↵
Switch
Day: switch between main and switching programmes at two specific
times a day.
Week: switch between main and switching programmes on three
specific week days.
Q greater: switch when flow greater than limit value.
Q smaller: switch when flow smaller than limit value.
External: switch on external signal.
Day
Creating programmes - Main programmes
Sample Set
↵
Creating programmes
↵
Programme 1,2,3,4
↵
↵
Sample
Mode
Time: sampling acc. to time.
Quantity: sampling acc. to quantity (connect quantity signal!).
Ext. sig.: sampling on external signal (assign signal input!).
Flow: sampling acc. to flow (connect quantity signal).
Time
Distribution Set
↵
Creating programmes
↵
Programme 1,2,3,4
↵
↵
Distribution
Sample
Time: bottle change after a specific time.
Number: bottle change after a specific number of samples.
Ext. sig.: bottle change on external signal (assign signal input!).
Time
Programme start Set
↵
Creating programmes
↵
Programme 1,2,3,4
↵
Start-stop
Aut: press Aut to start the programme.
Time: start the programme at a settable time.
Aut
Programme stop Set
↵
Creating programmes
↵
Programme 1,2,3,4
↵
Start-stop
Prog. end.: programme end on completion of the set programme.
Time: programme end after settable time.
No: continuous operation
Prog. end
Operation Set
↵
Creating programmes
↵
Programme 1,2,3,4
↵
Start-stop
Continuous: continuous operation;
Day: operation at 2 settable times per day.
Week: operation on 3 settable days per week.
Interval: settable operating duration in settable intervals.
Continuous
Synchronisation Set
↵
Creating programmes
↵
Programme 1,2,3,4
↵
Synchronisation
Aut-button:
Time:
sampling times and bottle change are synchronised.
Time+bot synchronisation of sampling and distribution. Fixed times
are assigned to the bottles.
Aut-button
Creating programmes - Switching programmes
Switch Set
↵
Creating programmes
↵
Switch 1,2
Sample: sampling type in the switching programme.
Distribution: distribution mode for the switching programme.
-
Sample Set
↵
Creating programmes
↵
Switch 1,2
↵
Sample
Time: sampling acc. to time.
Quantity: sampling acc. to quantity (connect quantity signal!).
Ext. sig.: sampling on external signal (assign signal input!).
Flow: sampling acc. to flow (connect quantity signal).
Time
Distribution Set
↵
Creating programmes
↵
Switch 1,2
↵
Distribution
Time: bottle change after a specific time.
Number: bottle change after a specific number of samples.
Ext. sig.: bottle change on external signal (assign signal input!).
Time
Creating programmes - Event programme
Parameter Menu level Setting options Factory setting