Endress+Hauser 485, Installation Instructions Manual

Page: 14 / 24

Installation Kit CM44x
14
Hauser
5 Installation
5.1 Opening the housing (does not apply to CM44xR)
5.1.1 CM44x
NOTICE
Pointed or sharp tools
If unsuitable tools are used, they can scratch the housing or damage the seal, and thus have a
negative impact on the leak-tightness of the housing.
‣
Do not use any sharp or pointed objects, such as a knife, to open the housing.
‣
Only use a suitable Phillips screwdriver.
‣
Release the housing screws step by step. Start with any screw and then release the screw
diagonally opposite etc.
‣
When closing the housing, also tighten the screws step-by-step in a diagonally opposite
sequence.
a0012688
Fig. 13: Releasing housing screws in a diagonally
opposite sequence with Phillips screwdriver
a0012689
Fig. 14: Opening display cover, max. opening angle 180°
(depends on installation position)