endolite linx, User Manual

Page: 4 / 76

938354S/1-0618
1
Introduction
2
Package Contents:
1 Linx limb
2 User guide
3 Cable bag and accessories
1 Battery charger
2 Battery charger AC power socket outlet adapter(s)
Linx is a fully integrated, microprocessor-controlled knee and foot system. The four
microprocessors provide simultaneous control over both foot and knee co-ordinating
their responses for a variety of terrains and situations in one complete biomimetic limb.
Individual adjustment can be made for slopes and stairs and a stop and lock mode for
standing. The set-up procedure is through an easy to use PC interface via a Bluetooth®
connection to the on-board module.
Application
Linx is to be used exclusively as part of a lower limb prosthesis.
Intended for single user.
Ensure that the user has understood all instructions for use, drawing particular
attention to the sections regarding safety and maintenance.
Features
• All the functions of a microprocessor control in both knee and hydraulic ankle
• Centralised control of knee and foot to give the user a better response
• One software based set-up via a built-in Bluetooth link
• Proven to reduce stress at the socket interface
• An easy access single charging and point
• Longer battery life, 3 days average use from the internal rechargeable Li-ion
battery pack
The enhanced stability system offers:
• Stop and Lock mode, control of knee flexion and ankle for standing
• Controlled ramp descent with Braking effect of knee and ankle
• Provides assistance during ramp ascent
• Dynamic stair descent with an easy start of knee flexion
coupled with increasing support to gently lower the user during flexion
• Supportive resistance to flexion as soon as the knee stops flexing
• Increased supportive resistance to flexion to prevent ‘stumbles’ associated with
instability at heel strike