Summary
Wireless dental endo motor is a root canal treatment equipment, which
converts electrical energy into mechanical energy and fulfill the goals of
biomechanical preparation of root canal.
• This product has an ergonomic design; its body is lightweight and is easy to carry.
• Use only 16:1 ratio contra-angle attachments with this product. Contra-angle attachments
with gear ratios other than 16:1 will cause errors in the display readings and torque limitation
system.
• There are 9 kinds of procedures (memory set) for selection in which optimum data is stored
in advance which can be modified according to the working conditions.
• According to the set load point it can automatically reverse and stop working and is able to
remember different actions of each program.
• Dental contra-angle and dental files must be sterilized every time after use.
• Built- in high capacity lithium battery, so it does not have to be changed frequently which
reduces costs for the machine.
• Fully charged batteries generally discharge gradually over time even though the motor is not
used. It is recommended to place the handpiece in the charger when not in use.
• Do not use bent, damaged, deformed or non ISO conforming files.
• The company's products provide correcting component for 5 years after which the products
are no longer produced, Company’s support for repair is possible only for there 5 years,
please understand.
This equipment is a special device for dental use, do not use in other places. Please read this manual
carefully before use.
3
The type of electric shock protection
The level of electric shock protection
The protection degree of harmful liquid inlet
Running Mode
Motor of the Handpiece
Battery Voltage
Battery Capacity
Net Weight
Power Adapter
Rated Input Voltage
Output Voltage
Input Voltage
Symbol Description
: part of B type
Internal power supply
Using part of B type f
Common equipment
Continue operation
Host Machine
DC 3.7V
800mAh
About 210g
Power Adapter
Rated Input Voltage
Output Voltage
Input Voltage
Symbol Description
: See Instructions
Main Technology Parameters
4
