IM4830B Rev B
15
October 9, 2019
value of the primary parameter g. Using the relationships above, the value of g will be adjusted
whenever a secondary parameter is edited. This happens automatically when the new value of
secondary parameter is saved. Note: This function is only operational in a user profile.
4.2.3.
Display Format
The numerical range of calculated secondary parameters is very wide, in the order of 1*10
-9
to
1*10
9
. For this reason, values are displayed in standard number form when in the range 0.001 to
100000 and in scientific notation when outside this range. Scientific display in the home screen is
limited to the format x.xx e xx, whereas in the edit screens the format is x.xxxxx e xx.
Figure 14: Format, home screen
Figure 15: Format, edit screen
4.3.
Creating and saving a user profile
“User profiles” can be created and saved into internal memory using the key pad. A maximum of 40 user
profiles can be saved within internal memory for quick and easy retrieval. To create a user profile, use the
following procedure, which assumes that only the default profile is present.
Starting from the home screen press the
PROFILES
menu key. The profiles menu is now displayed and is
showing details of the default profile. Press the
PROFILES
menu key again. The message “Writing Profile”
will be displayed, indicating that a new profile is being created. The Simulator creates all new profiles with
the parameters of the default profile. The new profile will be allocated a sequential number and will be
displayed as User Profile “X”. Note: Downloading a profile set will erase any user profiles saved in the
simulator.
Figure 16: Writing profile message
