7 Assisted Leveling
Go to Settings → Leveling → Assisted Leveling. Tap numbers ①/②/③/④/⑤ respectively.
2.
Return to the previous menu. Enter the assisted leveling interface. Adjust the Z-axis compensation value so
that the height from the nozzle to the printing platform is about the thickness of a piece of A4 paper. Return
to the previous menu, and the Z-axis compensation value will be configured.
(The CR Touch leveling will fail when the platform inclination is greater
than 2 mm. In this case, please use assisted leveling instead.)
The gap is about the thickness of
a piece of A4 paper, and there is
a slight resistance when pulling
the paper.
-2.30
-2.30
0%
