Rotate base (Ba) 180
°
until the back is facing towards
you.
Position the hole of Z-axis motor assembly at the
threaded hole of the aluminum profile (L) in the base (Ba),
secure with M4*18 screws, and use the Allen key to tighten the
screws.
Use the Allen key to loosen the screws of the Z-axis
coupling to prepare for insertion of the lead screw.
Insert the T8 lead screw into the coupling, and tighten
the screw that was loosened in the previous step.
Back
Loosen
the screw
Prepare the following parts:
a. T8 Acme lead screw (1x)
b. M4x18 hex drive flat head screws
(2x)
c. Z-axis motor assembly (Zm) (1x)
d. 2.5mm Allen key
Back
5