Keep the direction of the base (Ba) facing front
;
Place the aluminum profile (L) vertically over the left side frame
of the base (Ba), be careful that the (L) profile has the threaded holes
with the short sides facing downwards. Using the M5x45 screws and
washers, pass through bottom hole of the aluminum profile at the left
side of the base (Ba), align the threaded hole at the bottom of the
aluminum profile (L), and use the Allen key to tighten the screws.
Place the aluminum profile (R) vertically over the right side
frame of the base (Ba). Note that the (R) profile has through holes with
the short sides facing downwards. Also note that the holes are to the
left (see diagram) to ensure that the aluminum profiles are oriented
correctly. , Using M5x45 screws and washers, pass them through
bottom hole of the aluminum profile at the right side of the base (Ba),
align the threaded hole at the bottom of the aluminum profile (R), and
use the Allen key to tighten the screws.
Raise the base frame above the table with two blocks (boxes,
books, etc.) Install the screws through the base frame into the
threaded holes in the extrusions.
Prepare the following parts:
a. M5x45 socket head hex screws (4x)
b. M5 washer (4x)
c. Aluminum profiles (L) (1x)
d. Aluminum profiles(R) (1x)
e. Base (Ba) (1x)
f. 4mm Allen key
2