EDM 01-11v8 DAG 6.1S Card User Guide
©2005
20
Version 8: May 2006
4.7 Inspect 10G Ethernet Interface Statistics
, continued
Example
The following is an example of a card locked to a 10G Ethernet LAN
stream carrying no traffic load:
dag@endace:~$ dagsix –d dag0 –si
RAI RLE RPA LOS LOC LOF BER LFT RFT FCS_ERR BAD_PACKET GOOD_PACKET RXF
0 0 0 0 0 0 0 0 0 0 0 9090612 0
0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0
Example
The following is an example of a card locked to a 10G Ethernet WAN
stream carrying no traffic load:
dag@endace:~$ dagsix –d dag0 –si
RAI RLE RPA LOS LOC OOF LOF LOP LOF BER LFT RFT FCS_ERR BAD_PACKET GOOD_PACKET RXF
0 0 0 0 0 0 0 0 0 0 0 0 0 0 5458160 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
NOTE: The first second has high values as the counters have accumulated
their values over more than one second.
LAN Extended
statistics
Extended statistics are also available. The following example shows
extended statistics for the above LAN configuration.
dag@endace:~$ dagsix –d dag0 –ei
RAI RLE RPA LOS LOC LOF BER LFT RFT FCS_ERR BAD_PACKET GOOD_PACKET RXF RX_PARITY TEMP
0 0 0 0 0 0 0 0 0 0 0 64057561 0 0 67
0 0 0 0 0 0 0 0 0 0 0 14629029 0 0 67
0 0 0 0 0 0 0 0 0 0 0 14629444 0 0 67
0 0 0 0 0 0 0 0 0 0 0 14629463 0 0 67
LAN Extra
counters
The following extra counters are available with the extended statistics
option:
RX_PARITY Receive parity error count between the framer and
receive FPGA.
TEMP
Temperature of Rx FPGA in degrees Celsius.
Continued on next page
